undefined
How to use and maintain the disinfection and sterilization sprayer
Release time:
2020-11-16
1. Insert the crank handle into the crank clamp and gear box, then tighten the wing nut, and try to shake the barrel in the direction of rotation indicated by the arrow. If there is no noise, it means it is normal.
1. Insert the crank handle into the crank clamp and gear box, then tighten the wing nut, and try to shake the barrel in the direction of rotation indicated by the arrow. If there is no noise, it means it is normal.
2. First connect the powder spray head and powder spray pipe, tighten the screw on the large tightening ring, and then insert the ribbed end of the powder spray pipe into the groove of the hose.
3. The added medicinal powder should be kept dry and should be free of wood chips, gravel, mud, fibers and other debris. The switch must be turned off when adding medicated powder, so as to prevent the medicated powder from leaking into the fan part through the switch hole, causing powder accumulation and making it unable to shake.
4. Adjust the opening of the powder door switch according to the type of powder, degree of dryness and humidity and the amount of powder required per acre. Be careful not to turn the switch to the maximum at once, but gradually turn it up as needed. When spraying powder, people should walk upwind. When not spraying powder, the switch should be turned off to prevent powder from leaking into the fan through the switch hole and causing powder accumulation.
5. The powder spray pipe and the fan components are connected with hoses. They can swing up, down, left and right freely according to the operation requirements. However, care should be taken not to flatten the hose, block the air duct, or cause powder accumulation in the fan.
Key words:
Previous Page:
Next page:
Jilin Baihao Technology Co., Ltd.
Baihao Technology is a technology-based enterprise integrating R&D, production, sales and service of air disinfection and purification products. Since its establishment in 2019, the company has been committed to the research and development and production of disinfection and sterilization medical device products, striving to become an industry benchmark, enhance market competitiveness, provide more accurate protection for life, open up new safe spaces, and use technology to drive future development. At the same time, it contributes to scientific research, realizes sustainable development, and is determined to build a market-leading enterprise with high efficiency and high quality.
Quick Navigation
online message
Copyright: Jilin Baihao Technology Co. LTD
